Directions: Shake can before spraying.
1. Remove excess urine, dog marking, feces or vomit.
2. Spray on affected area. Concrete may become slick, so wipe dry with clean rag or allow to air dry. (Be careful while walking on wet floors!)
3. Look and sniff to see if odor and stain are completely gone. If not, product did not come in direct contact with problem source. Repeat step #2 as needed.
If odor and stain return: Top layer of odor source has been eliminated, drawing up remaining odors that penetrated concrete. Repeat steps #2 and #3 above until odor is completely gone; each application eliminates odor source from deep within concrete.
No need to soak. Just make sure product comes in contact with problem source.
Careful: Turn nozzle to face the black dot on the can, and keep can upright when spraying. Spraying the can at an angle greater than 60° may release all the
propellant and cause can to stop spraying.
Precaution: Contents under pressure. Do not puncture, freeze or incinerate. Do not store where temperature
exceeds 120° (49° c) or in direct sunlight. All ingredients are non-toxic and harmless to pets,
people and planet. While contact is not harmful, we recommend you keep it out of reach of children.
In case of eye contact, rinse with water.